|
|
|

|
|

|
|
|
|
|
2008.01-
|
Full
aero kit
|
|
|
2004.09-2008.01
|
Full
aero kit
|
|
|
Front
Half Spoiler
type
|
|
|
|
|
|
|
|
|
IMPUL
AERODYNAMICS
SYSTEM
|
|
IMPUL
LATIO
(2008.1-)
|
Material
|
Price
|
|
Front
Bumper
|
FRP
|
68,000
yen
(Tax
excluded)
|
|
Front
Grille
|
FRP
|
38,000
yen
(Tax
excluded)
|
|
Side
Steps (Side
Skirts)
|
FRP
|
50,000
yen
(Tax
excluded)
|
|
Rear
Half
Spoiler
|
FRP
|
45,000
yen
(Tax
excluded)
|
|
Rear
Wing
|
FRP
|
50,000
yen
(Tax
excluded)
|
|
Full
aero kit (incl.
above 5
aerokits)
|
240,000
yen
(Tax
excluded)
|
|
|
IMPUL
LATIO
(2004.1-2008.1)
|
Material
|
Price
|
|
Front
Bumper (with
Grille)
|
FRP
|
82,000
yen
(Tax
excluded)
|
|
Side
Steps (Side
Skirts)
|
FRP
|
50,000
yen
(Tax
excluded)
|
|
Rear
Half
Spoiler
|
FRP
|
49,000
yen
(Tax
excluded)
|
|
Rear
Wing
|
FRP
|
50,000
yen
(Tax
excluded)
|
|
Full
aero kit (incl.
above 4
aerokits)
|
210,000
yen
(Tax
excluded)
|
|
Front
Half
Spoiler
|
FRP
|
45,000
yen
(Tax
excluded)
|
|
Front
Grille [ for
genuine bumper
]
|
ABS
|
38,000
yen
(Tax
excluded)
|
|
|
Note:
|
As
for the rear
wing, it is
compatible with
all model of
SC11 TIIDA
LATIO.
|
|
|
Installation
charge and
painting const
are not
included in the
price
|
|
|
Painted
Front Half
Spoiler is
available(Colour:
KY0, QX1, B20).
The price is
68,000 yen (Tax
excluded)
|
|
|
Fog
lamp is sold
separataly.
|
|
|
|
|
|
|
|
|
|

|
|

|
|
|
|
|
IMPUL
HI-POWER CONTROL
UNIT
|
|
|
|
Bring
out vehicle potential
sufficietly!
|
|
|
|
-
Increase maximum
power
|
|
-
Improve engine response
and mileage.
|
|
|
|
[ For
HR15DE engine ]
|
|
price:
148,000
yen
(Tax
excluded)
|
|
|
|
Trade-in
price: 98,000
yen
(Tax
excluded)
|
|
|
|
|
[ For
Compressor kit CR-02
equipped HR15DE engine
]
|
|
price:
148,000
yen
(Tax
excluded)
|
|
|
|
Trade-in
price: 98,000
yen
(Tax
excluded)
|
|
|
|
|
Note:
Premium gasoline
designated
|
|
|
|
|
|
|
|
|

|
|

|
|
|
for
MR18DE Engine
|
|
|
|
|
for
HR15DE Engine
|
|
|
|
IMPUL
EXTRA POWER
KIT
|
|
|
|
The
EXTRA POWER KIT
generates more power and
produces unparalleled
responsiveness. The
device consists of IMPUL
Hi Power Control Unit
and big throttle valves.
It provides the
performance boost of
IMPUL Hi Power Control
Unit while allowing you
to use regular gasoline.
Needless to say, using
premium gasoline for
EXTRA POWER KIT can
bring out more power. If
a car has already been
equipped with IMPUL Hi
Power Control Unit, you
can still boost the
performance by adding
the throttle
valves.
|
|
|
|
Contents:
-
IMPUL
POWER THROTTLE VALVE
-
IMPUL HI
POWER CONTROL UNIT
designed for EXTRA POWER
KIT
Selectable
between Regular Gasoline
or Premium Gasoline
except for that your car
is limited use for
Premium gasoline.
|
|
|
|
KIT
PRICE
(JPY,
Excl. Sales
Tax)
|
THROTTLEVALVE
&
COMPUTER
|
COMPUTER
TRADE-IN
|
NO
TRADE-IN
|
REMARKS
|
|
Type
|
Engine
|
|
SJC11
|
MR18DE
|
144,000
|
198,000
|
250,000
|
*2
|
|
SC11
|
HR15DE
|
144,000
|
198,000
|
250,000
|
*1
|
|
|
*1
|
|
Throttle
valve produced
before November
2006 is(are)
not accepted as
trade-in.
|
|
*2
|
|
Throttle
valve produced
before January
2008 is(are)
not accepted as
trade-in.
|
|
*
|
|
After
installing this
unit, be sure
to complete the
study of
accelerator’s
neutral
position, the
study of
throttle’s
neutral
position and
the study of
idle air intake
mass.
|
|
*
|
|
If
immobilizer
equipped, all
key's
registrations
for immobilizer
are
required.
|
|
|
IMPUL
POWER THROTTLE
VALVE
|
|
|
|
KIT
PRICE
(JPY,
Excl. Sales
Tax)
|
THROTTLEVALVE
TRADE-IN
|
NO
TRADE-IN
|
REMARKS
|
|
Type
|
Engine
|
|
SJC11
|
MR18DE
|
58,000
|
112,000
|
*2
|
|
SC11
|
HR15DE
|
58,000
|
112,000
|
*1
|
|
|
*1
|
|
Throttle
valve produced
before November
2006 is(are)
not accepted as
trade-in.
|
|
*2
|
|
Throttle
valve produced
before January
2008 is(are)
not accepted as
trade-in.
|
|
*
|
|
After
installing this
unit, be sure
to complete the
study of
accelerator’s
neutral
position, the
study of
throttle’s
neutral
position and
the study of
idle air intake
mass.
|
|
*
|
|
If
immobilizer
equipped, all
key's
registrations
for immobilizer
are
required.
|
|
|
|
|
|
|
|
|
|

|
|

|
|
|
|
IMPUL
COMPRESSOR KIT
CR-02
|
|
|
|
approx.
35ps UP!
(by
comparison with
normal)
|
|
|
|
- Fine
acceleration without
time-lag from
stating.
|
|
- Very
reliable and
durabile.
|
|
|
|
[
Compatible with HR15DE
]
|
|
|
|
Price:
298,000 yen (Tax
excluded)
|
|
|
|
Note:
|
IMPUL
HI-POWER
CONTROL UNIT
and Premium
gasoline
required.
|
|
The
warranty covers
only the
Compressor
itself.
|
|
In
use of the
Compressor, you
may hear
operating sound
such as sliping
sound. However,
it won't affect
performance of
the
Compressor.
|
|
|
|
|
|
|
|
|
|

|
|

|
Super-lightness!
7.0J-17 size is
6.48kg
|
|
|
|
|
|
|
TEAM
IMPUL NS-GT
II
|
|
|
|
Recommended
Wheel size: 7.0J-17
(+45) / 4H-100
|
|
(Recommended
tyre size :
205/45R-17)
|
|
Price :
34,000
yen / 1 pce (Tax
excluded)
|
|
|
|
Recommended
Wheel size: 6.5J-17
(+45) / 4H-100
|
|
Price :
32,000
yen / 1 pce (Tax
excluded)
|
|
|
|
[ For
TIIDA 1800/6MT ]
NEW
|
|
Recommended
Wheel size: 7.0J-17
(+45) / 4H-114.3
|
|
(Recommended
tyre size :
205/45R-17)
|
|
|
|
Note:
|
Colour:
Gold, Silver,
Hyper Black
available*
*Hyper Black
wheel: 2,100
yen up / 1
pce
|
|
|
|
|
Center
cap is not
included
|
|
Price :
1,800
yen / 1 pce (Tax
excluded)
|
|
|
|
|
|
|
|
|
|
|

|
|

|
|
|
|
IMPUL
AURA SX-10 POLISH
ver.
|
|
|
|
- Luxury
concept model
|
|
- Made
by IMPUL NEW SUPER CAST
method
|
|
- 20%
weight saving and 30%
high strength than
genuine wheel
|
|
|
|
Recommended
Wheel size: 6.5J-16
(+48) / 4H-100
|
|
(Recommended
tyre size :
195/55R-16)
|
|
|
|
Price :
28,000 yen / 1
pce (Tax
excluded)
|
|
|
|
|
|
|
|
|
|
|

|
|

|
|
|
|
|
IMPUL
DATA G
|
|
|
|
Front
|
|
PFG-17
|
|
Price
: 15,000
yen
(Tax
excluded)
|
|
|
|
|
|
Rear(2WD)
|
BSR-43
|
Price
: 15,000
yen
(Tax
excluded)
|
|
|
|
|
|
Rear(4WD)
|
BSR-44
|
Price
: 19,000
yen
(Tax
excluded)
|
|
|
|
|
|
|
|
|
|

|
|

|
|
|
|
IMPUL
EMBLEM
EC-02
|
|
|
|
Chrome
coat flame
finishing
|
|
Double-faced
tape is embded
on the
back.
|
|
Size:
W145 x H25 x T3
mm
|
|
|
|
Price
: 7,000
yen
(Tax
excluded)
|
|
|
|
|
|
|
|
|
|

|
|

|
|
Terms and
Conditions
|
|
1.
|
All prices are
subjected to change without prior
notice.
|
|
2.
|
All prices are
not inclusive of installation
cost or coating cost(excluding
painted aeroparts).
|
|
3.
|
All products may
run out of stock or become end of
life without prior notice.
|
|
4.
|
All IMPUL
products are produced for Nissan
vehicles of Japanese
specification or Nissan vehicles
manufactured in Japan, and the
use or installation of IMPUL
parts will be restricted to
within Japan. Do not use IMPUL
parts for the Nissan vehicles of
export specification, the Nissan
vehicles manufactured in Japan
and exporting to oversea
(including parallel
import/export), the Nissan
vehicles manufactured in oversea
or any other unexpected vehicles.
In case IMPUL parts are installed
into those vehicles in Japan or
in oversea, the warranty
determined by this company does
not cover those situation.
|
|
|
|
|
|
|
|
|
|